http://www.4x4Wire.com/4x4/toyota/4Runner/tech/suspension/phil.htm

Front:
Bilstein HD Shocks
First Generation Cornbred 1.5" Spacers
Performance Products 1" coils

Rear:
Bilstein HD Shocks
Cornbred 2" rear spacers
Performance Products 1" coils

On my previous 4Runner I had the Performance Products 1" lift springs. The ride was very comfortable and the truck had a very nice stance. After about a year I wanted to go higher and get larger tires. The Cornbred spacers were very popular with Tacoma owners so I contacted David. I soon received one of the first sets of spacers developed for the 4Runner. Unfortunately a few weeks later my 4Runner was involved in an accident.

When I got the new 4Runner, not many people were lifting their trucks and having the spacers already, I decided to go with my original thoughts. I bought a set of used PP 1" springs to go along with Bilstein shocks and the Cornbred spacers (1.5" front and 2" rear).

The lift combination gave the truck a very aggressive stance. I ended up with 23.5" in front, fender lip to center of the hub, and 24" in the rear. With the addition of 285/75R16 Goodyear MTR tires, I was ready to roll.

On-road this setup is pretty good but it has stiffened up the truck a bit too much. You do feel the bumps. Off-road the added height helps along with the 33" tires. Articulation is very limited. Stiffness and lack of articulation is due to the spacer/spring combo, too much preload of the progressive rate springs.

Right now there are more 4Runner owners with lifted trucks and I am researching which lift setup will give me the height I want, improve ride quality and off-road capability.

Front setup.	Nice stance

Please support 4x4Wire by visiting our featured sponsors

| 4X4Wire Portal | About 4x4Wire | Search 4x4Wire | TrailTalk Forums | Advertiser's Guide |

This site and all original materials contained herein are Copyright © 1999 - 2009 by OutdoorWire, Inc.™ -- All Rights Reserved.
The use of this website, OutdoorWire, or any of its publications or services is subject to the terms of use agreement.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News are all trademarks and publications of OutdoorWire, Inc.