Re: TOY: Birfields won't come out

[Luke Miller <ihatetuffies@xxxxxxxxx>]

It sounds like you need a copy of the repair manual
for the front axle if you didn't know about the flats
on the birfield. Grab the pdf here:

http://www.lukemiller.org/toys/1985_toyota_4wd_front_axle_FSM.pdf

--- patrick.toy@cox.net wrote:

> I am rebuilding a solid front axle and I am swaping
> out the stock 3rd member (4.10) for a 4.56 3rd.  I
> have both hubs completely broken down all the way
> back to the knuckle.  The birf is loose and will
> slide a little bit outward, but it will not
> completely come out on either side.  is there a
> certain position that thing has to be in to slide
> all the way out so that I can clean it fully and
> swap the 3rd out?
> 
> TIA for your help!
> 
> Patrick
> 
> 4x4Wire.com Toyota Section
> http://www.4x4Wire.com/toyota/
> 



		
__________________________________ 
Discover Yahoo! 
Find restaurants, movies, travel and more fun for the weekend. Check it out! 
http://discover.yahoo.com/weekend.html