TOY: Re: So where do you get your 54mm or 2 1/4 sockets?

[Jay Kopycinski <jayk3@xxxxxxxxxxxxxx>]

John Stowers <jstowers@austincentral.com> wrote:

>For the spindle nut for the front bearings. Checked all over Austin for one
>and only place that has one is Sears and will be over $40 with the adaptor
>so I can use my 1/2" drive torque wrench.

Forget the adapter if you'll never be using a 3/4" drive rachet. I took a cheapy
3/8" drive socket of about 3/4" od and welded it in the square recess in the
socket. Now I just need a 3/8" drive rachet to use the socket.

Jay Kopycinski