TOY: Re: Timing Chain & Gears

["Dale Sinkey" <dps444@xxxxxxxxxxxxx>]

I think you need a double row cover to.
SeaBass44/darren





----- Original Message -----
From: Alan Green <AlanGreen741@home.com>
To: <toyota@4x4wire.com>
Sent: Monday, May 07, 2001 2:55 PM
Subject: TOY: Timing Chain & Gears


>
> In attempting to do some preventative maintenance on my '84 22R by
> replacing the timing chain, gears, guides, and tensioner before something
> broke and caused me serious grief (because it was starting to get a little
> noisy once the engine warmed up), I discovered that I probably have an '81
> or '82 engine in my '84 because the timing gears and chain were the double
> row type that only came in pre '83 engines.
>
> I discovered all of this because the original kit I got had the typical
> later model SINGLE row chain and gears, which I was told by the supplier
> superceded the double row chain and gears and GUESS WHAT...?!
> NOOOOOT!!!
>
> I took it back, got a kit for an '82, and SURE ENOUGH, it was the double
> row chain and gears.
>
> Interestingly, the pre '83 kit that I got from Federal-Mogul comes
COMPLETE
> with DOUBLE ROW chain, gears, METAL backed guides, tensioner, seal, and
> gaskets.
>
> The Federal-Mogul part #'s are:
>
> '81-'82 - KT-1019S  (double)
> '83 and up - KT-1020S (single)
>
> The point of all this, besides information for anyone who might be
> interested, is the only difference I noticed between the two kits,
(besides
> the obvious single/double row differences), is that the wider double row
> crank gear needs a shorter oil pump drive gear to go with it.
>
> My ? is, just out of curiosity, is there any reason that anyone knows of
> why the obviously heavier duty double row gear and chain and metal backed
> guides couldn't be used on a later model engine, as long as they got the
> shorter oil pump drive gear to go with the wider crank gear?
>
>
>
>
> 4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/