RE: TOY: Dash disassembly? 1992 Truck stereo installation...

["Payne, Mike K." <MPayne1@xxxxxxxxxxxx>]

I thought you just grabbed a handy allen wrench and undid the four stainless
steel allen screws that hold the reinforced carbon fiber stereo bezel in and
then remove the whole assembly being careful not to bang the stereo or CB on
anything?  Oh that is just on my truck... :D

> -----Original Message-----
> From:	M. D. Smith V [SMTP:deesmith@hiwaay.net]
> Sent:	Monday, May 07, 2001 4:36 PM
> To:	toyota@4x4wire.com
> Subject:	Re: TOY: Dash disassembly? 1992 Truck stereo installation...
> 
> ----- Original Message -----
> From: "Patrick Shelston" <patrick@mail.shelston.com>
> To: <toyota@4x4wire.com>
> Sent: Monday, May 07, 2001 3:05 PM
> Subject: RE: TOY: Dash disassembly?
> 
> You wrote:
> "I am putting in a new Pioneer head unit... can any give me a quick
> rundown
> on getting back there. I assume I have to remove part of the lower
> dashboard."
> 
> | So stupid... sorry.
> |
> | It's a 92 Truck V6. doh...
> 
> ==> Hey Patrick,
>  you will need to R&R quite a few pieces of the dash to get to the radio.
> If you are good with jig-saw puzzles then it should be a breeze!
> 
> From *memory* first remove the bezel around the instrument cluster.
> You will need to remove the lower valence, (part below the steering wheel
> column).
> I *think* you may need to remove the ashtray, and cup holder.
> (don't quote me on that one).
> Once you get the dash facial components removed there will be 4 hex-head
> screws
> that hold the stock Toyota "Din-style" radio in place.
> 
> It should be clear as muddy water from there.  ;- )
> Good Luck and Happy Trails,
> 
> Dee
> M.D. Smith, V   deesmith@hiwaay.net  TLCA # 7039  RCRC # 31
> Huntsville, Alabama  USA
> 
> 4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/