Re: TOY: Re: Rear CV driveshaft Q

[DRM033@xxxxxxx]

lee.benjamin@ssd.loral.com writes:

> Don't hear it too often, but you can eliminate vibration without a CV.
>  You have to rotate the pinion higher than with a CV shaft so both
>  u-joints are at opposite angles. See web site for picture:
>  http://www.geocities.com/benmlee/u-joint.htm
>  I have seen it done once on a F150 truck.

Shhhhh..... I bet that is why mine did so well before the dented shaft ;-)

And I would bet the theory is that under driving load, the suspension settles 
and you get cancelling angles...

David
DRM033@aol.com
http://www.4x4spot.com