Re: TOY: Re: New Engine Update

["C. Andrew Zook" <andyzook@xxxxxxxxxxxxxxxxx>]

Sorry.....

YMMV!!!!!! ;-)


>
> When I put in rebuilt RC injectors, I didn't lube them up and they have
> held for since spring of 99. I then went to BHCC 99. But, using grease
> could save alot of trouble.
>
>
> "C. Andrew Zook" wrote:
> >
> >
> > Did you lube the orings? If not, I would suggest removing all of them
and
> > replacing them. Coat them liberally in grease before you install them.
> >
> > I am speaking from experience here... I had a REALLY bad leak, fixed
that
> > one, and had another one burst about a month down the road (I had sliced
it
> > when I installed it). I bought a new set, lubed 'em up, and have had no
> > problems since!
> >
> > CAZ
> >
> > 4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/
>
> --
> Cheers,
>
> Karl Bellve ICQ # 13956200
> 1985 4Runner SR5 TLCA# 7938
>
> Old Man Emu lift, dual Toyota Electric Lockers, TJM-13 Bumper, REP8000
> winch, Stout Equipment rear bumper, RS9000s, Persson Sway-Bar
> Disconnects, FJ40 vented rotors and IFS calipers
> 4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/
>