TOY: Re: New Engine Update

["C. Andrew Zook" <andyzook@xxxxxxxxxxxxxxxxx>]

> So far, we had a small water leak from the water pump that was fixed after
a
> couple turns with a ratchet,  the oil thing, a small exhaust leak fixed
the
> same way as the water leak, now one of the injectors is leaking (O-Rings
> were replaced)... so tomorrow we will be pulling the no. 1 injector to try
> and find the hold up.

Did you lube the orings? If not, I would suggest removing all of them and
replacing them. Coat them liberally in grease before you install them.

I am speaking from experience here... I had a REALLY bad leak, fixed that
one, and had another one burst about a month down the road (I had sliced it
when I installed it). I bought a new set, lubed 'em up, and have had no
problems since!

CAZ