Re: TOY: New Toy :-) Questions too...

["rick rick" <big22bird@xxxxxxxxxxx>]

> >
  i think it is right in the headlight switch itself, ypu may need to 
replace it, or at least try a known good used one..


> > 1. The high beams do not work.  If you flip them to high beam the low 
>beams
> > go out and darkness comes.  But, you can pull back on the momentary 
>"pass"
> > switch and they operate as they should.  Is this a wiring issue, or the
> > headlamps themselves?  I plan to replace the headlamps (old, dim) first 
>and
> > go from there - suggestions?
>
>This happened on my truck. Pull apart the steering column. On the
>backside of the switch, you will find some metal strips with contacts
>covered by a plastic cover. I believe the center one isn't making the
>appropiate contact when you pull the high beam switch. I bent it a
>little and it has been working fine for me for a few months.
>
>--
>Cheers,
>
>
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.