Re: TOY: What wheel backspacing do I need for a SAS

[Brien.Blankenship@xxxxxxxxxxx]

You'll need different wheels unless you use a spacer. IFS wheels have more
backspacing than Solid axles. I have 3.5" backspace 8" wheels w/35x14.5's
and I'm about 1/4" from my tie rod on the passenger side. I'd go with at
most 3.5" maybe even less.


                                                                                                                            
                    Kendall                                                                                                 
                    Carlton               To:     Toy4x4 <toy4x4@moab.off-road.com>, Toyota <toyota@4x4wire.com>            
                    <kcarlton@cso.        cc:                                                                               
                    atmel.com>            Subject:     TOY: What wheel backspacing do I need for a SAS                      
                    Sent by:                                                                                                
                    owner-toyota@4                                                                                          
                    x4wire.com                                                                                              
                                                                                                                            
                                                                                                                            
                    11/01/2000                                                                                              
                    01:45 PM                                                                                                
                    Please respond                                                                                          
                    to toyota                                                                                               
                                                                                                                            
                                                                                                                            




I am in the processing of collecting parts for my SAS on a 88 Xtra Cab.  I
currently have the stock aluminum SR5 7" wide wheels.  I am planning on
going with 35X12.50 BFG MT tires on an 8" rim.  I also have a set of
aftermarket steel 8" wide American Racing rims off another IFS truck that I
think are 4 or 4.25 inch backspacing.  My question is can I use these rims
on a solid axle or do I need new rims?  Is there any specific backspacing
that works better in this application?

Thanks
Kendall
Colorado Springs, Co

4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/