RE: TOY: Birfield Joint or Hub

["Erik Bibelheimer" <thebeebs@xxxxxxx>]

Check out these pages if you haven't already:

http://www.outdoorwire.com/4x4/toyota/maintenance/front_end/
http://reality.sgi.com/rogerb_engr/4x4/CheapTricks/AxleRebuild.html
http://www.off-road.com/~morgan/tech/axle/index.html
http://www.off-road.com/toyota/wheel_bearing.html

And here for Allpro's axle/knuckle rebuild kit:

http://www.allprooffroad.com/knuckle.html

Somebody on the list may be able to scan and email the applicable factory
manual pages you need.

HTH.  Good luck!

-- Erik Bibelheimer, Citrus Heights, CA
http://home.off-road.com/~bibelheimer
'86 4runner, '97 T100

> From: "Payne, Mike K." <MPayne1@allstate.com>
> Subject: RE: TOY: Birfield Joint or Hub
> 
> Time is one thing I do have... 15 hours (in my case probably twice that
for
> lack of experience) of grease and dirt doesn't scare me.  I took off a
week
> from work (gotta use my vacation sometime) just to take this on, so I
> wouldn't be rushed.  I even acquired a friends spare vehicle to make
parts
> store trips (wife will have the car and my other truck... well it has
seen
> better exhaust days) so I think I am set. But like I said in my last post
> there seems like a lot of unknowns and things I could screw up pretty
> seriously for not knowing what I am doing...