TOY: Hints for Birfields

["paul elbisser" <paule@xxxxxxxx>]

 If your new to Birfields I got a few hints to help you out.

 1  Turn your steering stops out all the way to limit your steering more.
Less angle on the Birfields = less stress

 2  if you replace your nuckle beerings be sure to replace them with Koyo
like they came with from the factory. The hime are in there for the
diference in axle casting. If you replace with the same that are in there
you just have to put the shims back in the same position they came out.

 3  Yes that square plug on the top of the knucle is to fill he joint with
grease, not gear lube. If gear lube comes out when to take it apart the
inner seal is bad.

 Hope this helps someone, now I got to start building my new wing!

Paul Elbissser
Pres. Rice on the Rocks
TLCA Eastern Rep.