TOY: Re: Tranny Gear Ratios

["Brandon Miller" <brandon@xxxxxxxxxxxxx>]

Japanese tranny?
Is that what I had in my 83? G52 I think it was called?


----- Original Message -----
From: "Randy Burleson" <randii@4x4wire.com>
To: <toyota@4x4wire.com>
Sent: Tuesday, August 01, 2000 9:39 PM
Subject: TOY: Tranny Gear Ratios


> At 10:39 PM 8/1/00 -0400, you wrote:
> > > So then, 2nd gear (with the 4.7 t-case gears) will be a little better
> > > (crawling wise) than the stock setup with 4.88s? Am I reading you post
> > > correctly? If that's the case, I can live with that as well. Ideally,
I'd
> > > like to have something around the stock range 5.29 differential
gearing
> > > anyway.
>
> Here's what I remember:
> Japanese tranny:                1st 5.15
> R151 turbo tranny:              1st 4.31
> R150 V6 tranny          1st 3.93
> most 4-cylinder trannies:       1st 3.93
>
> The general rule for the other gears, 2-5, are:
> 2nd 2.74, 3rd 1.93, 4th 1.00 5th .83
>
> Randii
> Randy Burleson
> Managing Editor
> 4x4Wire, the Outdoor Recreation Network (ORN)
> http://www.4x4wire.com
>
> 4x4Wire.com Toyota Section http://www.4x4wire.com/toyota/
>