TOY: body lift and will v6 gears fit 4cyl

[Scott Shelley <sshelle@xxxxxxxxxx>]

Guys,

I am supposed to finally put on my body lift.  I remembered someone
suggested placing Stainless steel 3" x 3" squares that are 3/32" thick
between the body and blocks or bushings.  It seems to me that the 3 inch
squares may be too large.  What size should I get them cut and how many
will I need for my 94 x-tra cab pu.  I counted 12 blocks so I am assuming
that there are twelve mounting positions that will need the SS plates.  AM
I correct?


Also I am switching from stock 4:11 to 4:88 in my V6. Can the gears that I
am taking out be used in a 92 4 cylinder?  I read  in the NWOR catalog that
the V6 gears are 25% larger than the 4 cyl ones.  What is the story behind
this?  Can the V6 gears be swapped into the 4 cyl?

Thanks,

Scott