Re: TOY: Re: Cheap body lift?
4x4Wire TrailTalk BBS Galleries Search ORN
http://www.4x4wire.com/lists/toyota/200004/msg00077.html Short Cuts

[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: TOY: Re: Cheap body lift?



internut@ptd.net writes:

> I don't know how much 1/2" will actually gain you, but why not!  It really
>  is not that hard to install... you could probably have it on in less than 2
>  hours without a problem.

I guess the main benefit I see is that I can use the stock hardware.  Buying
longer bolts, nuts, & washers would actually make this cost money - something
I like to avoid any time I can ;-)

LIke I said, I know half an inch seems pointless, but if you could see what I
have here, you you would understand.  At full compression, the boggers tread
just starts to touch the inner fender & lower body seam.  So, with a 1/2"
body lift, as well as the fender trimming (like everyone else has already
done) & seam hammering I will have just enough, and no money spent...

David
DRM033@aol.com
http://www.tennessee4x4.com/toyota