Re: TOY: New throttle body setup (22RE) Content-Type: text/plain; charset=us-ascii

[Roger Brown <rogerb@xxxxxxxxxxxxxxxxxx>]

> I believe you have to atleast adjust the throttle body set screw first.
> You close the throttle body all the way, then back out the set screw a
> few turns. The exact procedure is in the manual. Then you can adjust the
> idle speed.

I did set up the new TB on the bench and adjusted the TPS.  Having trouble
getting the engine to idle now that its all together, but it does run if I
give it some throttle.  May be some other problem, too, but I was looking for
an initial setting for the idle air screw to start with.  On my old TB, I
noticed the idle setting was fairly sensitive, but once you found the "right"
spot, it idled nicely.  The air valve that sits below the intake seems to be
working, its probably original ('85).