RE: JPOR: Front D44 Questions (and Bearing info!)

[Dave Jacobs <DJacobs@xxxxxxxxxxxxxxxxxx>]

		-----Original Message-----
		From:	B Nelson [mailto:cjtrailrider@yahoo.com]
		Sent:	Thursday, March 08, 2001 1:34 PM
		To:	jeepoffroad@4x4wire.com
		Subject:	RE: JPOR: Front D44 Questions (and Bearing
info!)

		****************Please Remember to snip your
replies***************
		I must have my Info at home so, here is off the top of
		my head.  Ford made two main spindles, one 5 bole one
		6 bolt.  This was from 78-94 (maybe 95~96) then they
		changed the type of hub altogether.  The six bolt
		works with the Chevy knuckle however is it ~ 1/4"
		longer than the 74-76 FSJ/Chevy Dana 44 spindle.  I
		have both Spindles at home, that's how I know.  If
		really want the Ford one's my are for sale as I want
		the 74-76 FSJ/Chevy spindles for my set up.

		Brad N

		Here is some info I grabbed from a list on going to
		Disk brakes:

		For those of you who are going the Chevy Conversion,
		here are the Napa part numbers that work. 1`. (2)
		Spindle Bearings #B2110. You may or may not need to
		replace these. They are the bearings inside the
		spindle and the small seal. 2. (2) Spindle Seals
		#19965 3. (2) Rotors/Hub Assembly (77-79 bronco)
		#86297 4. (2) Calipers (74 Blazer loaded) #242-2022
		#242-2023 5. Brake Pads(74 Blazer) #TS-728A-M 6. (2)
		Flexible Brake hose - #4136761 7. (2) Caliper Bolts
		#82204 8. (2) Banjo Bolts (74 Blazer) - I could not
		find the part # 9. Caliper Bushings - Carquest # H5103
		10. 76 F250 2wd Mater Cylinder 1 1/4" bore # 4735408


		__________________________________________________
		Do You Yahoo!?
		Get email at your own domain with Yahoo! Mail. 
		http://personal.mail.yahoo.com/
	
*******************************************************************
		     Link to Archive, Mission Statement, Rules, Subscribe
and
		           Unsubscribe instructions  are available at:
		             http://www.pclink.com/jnutter/JPOR.htm