Re: Re: JPOR: Front D44 Questions

[ssmith@xxxxxx]

Sorry - that is correct.  Some later spindles used larger bearings.   My first set I picked up didn't work..  I 'think' they were off a 79.  In fact, I thought that 79 was the 'crossover' year, but John would know better then me.

Steve

>
>From: John Nutter <jnutter@pclink.com>
>Date: Wed, 07 Mar 2001 22:27:21 -0600
>To: jeepoffroad@4x4wire.com
>Subject: Re: JPOR: Front D44 Questions
>
>****************Please Remember to snip your replies***************
>You need spindles from a '74 to '76 Wagoneer or Chevy. Some very early
>'77s may also have the right spindles for this, but latley I've seen
>more '77s that had the larger inner wheel bearings. 
>
>I'm pretty sure you told me that your axle is from a '76 Wag, so you
>should be OK. 
>
>Courtney Kerr wrote:
>> 
>> ****************Please Remember to snip your replies***************
>> >  > So here's what I plan on doing:
>> >>
>> >>  Rotors: 78-up Ford F-150
>> >Right
>> Aimco #5492
>> 
>> >  > Wheel Bearings: 78-up Ford F-150
>> >Right
>> Timken Set 37
>> Timken Set 45
>> 
>> >  > Calipers & brake pads: '76 Wagoneer
>> >Right
>> Performance Friction #0524
>> 
>> So my question is, will the Ford rotors and bearings work on the
>> Wagoneer spindles?
>> 
>> I hope so.
>> 
>> --
>> 
>> -Courtney
>> *******************************************************************
>>      Link to Archive, Mission Statement, Rules, Subscribe and
>>            Unsubscribe instructions  are available at:
>>              <a href="http://www.pclink.com/jnutter/JPOR.htm">http://www.pclink.com/jnutter/JPOR.htm</a>
>
>-- 
>John Nutter KC0JSX
>JeepWire.Com Editorial Staff
><a href="http://www.outdoorwire.com/4x4/jeep/">http://www.outdoorwire.com/4x4/jeep/</a>
>
>Admin for Jeepoffroad Mailing List
><a href="http://www.pclink.com/jnutter/jpor.htm">http://www.pclink.com/jnutter/jpor.htm</a>
>
>TrailMaster of Trailriders 4x4 club 
><a href="http://www.mntrailriders.org/">http://www.mntrailriders.org/</a>
>*******************************************************************
>     Link to Archive, Mission Statement, Rules, Subscribe and
>           Unsubscribe instructions  are available at:
>             <a href="http://www.pclink.com/jnutter/JPOR.htm">http://www.pclink.com/jnutter/JPOR.htm</a>
>
>