RE: JPOR: Front D44 Questions

[Dave Jacobs <DJacobs@xxxxxxxxxxxxxxxxxx>]

We also found out that early Bronco with drum brakes have the correct
spindle too. And newer F150's also have them. I re-did ball joints recently
on a 1990 model and the spindles were the ones we want! 

		-----Original Message-----
		From:	John Nutter [mailto:jnutter@pclink.com]
		Sent:	Wednesday, March 07, 2001 10:27 PM
		To:	jeepoffroad@4x4wire.com
		Subject:	Re: JPOR: Front D44 Questions

		****************Please Remember to snip your
replies***************
		You need spindles from a '74 to '76 Wagoneer or Chevy. Some
very early
		'77s may also have the right spindles for this, but latley
I've seen
		more '77s that had the larger inner wheel bearings. 

		I'm pretty sure you told me that your axle is from a '76
Wag, so you
		should be OK. 

		Courtney Kerr wrote:
		> 
		> ****************Please Remember to snip your
replies***************
		> >  > So here's what I plan on doing:
		> >>
		> >>  Rotors: 78-up Ford F-150
		> >Right
		> Aimco #5492
		> 
		> >  > Wheel Bearings: 78-up Ford F-150
		> >Right
		> Timken Set 37
		> Timken Set 45
		> 
		> >  > Calipers & brake pads: '76 Wagoneer
		> >Right
		> Performance Friction #0524
		> 
		> So my question is, will the Ford rotors and bearings work
on the
		> Wagoneer spindles?
		> 
		> I hope so.
		> 
		> --
		> 
		> -Courtney
		>
*******************************************************************
		>      Link to Archive, Mission Statement, Rules, Subscribe
and
		>            Unsubscribe instructions  are available at:
		>              http://www.pclink.com/jnutter/JPOR.htm

		-- 
		John Nutter KC0JSX
		JeepWire.Com Editorial Staff
		http://www.outdoorwire.com/4x4/jeep/

		Admin for Jeepoffroad Mailing List
		http://www.pclink.com/jnutter/jpor.htm

		TrailMaster of Trailriders 4x4 club 
		http://www.mntrailriders.org/
	
*******************************************************************
		     Link to Archive, Mission Statement, Rules, Subscribe
and
		           Unsubscribe instructions  are available at:
		             http://www.pclink.com/jnutter/JPOR.htm