Re: JPOR: Pig shaving :)

[Jeff <jayers@xxxxxxxxxxxxxx>]

I used a portable band saw to trim a little and then cleaned it up some
with a 4.5" angle grinder.  I really didn't remove much, but it did end
up being about 1/4" and noticeably smoothed the bottom.  I did not get
into any bolts.  I had to trim a little off the bottom of the cover to
keep it above the bottom of the housing too.  It is trimmed to be right
up to the head of the lowest bolt and then parallel to the tubes across
the bottom.  I could probably remove more if I wanted, but I think I'll
leave it as is.  Jeff 

MoultonFamily wrote:
> 
> ****************Please Remember to snip your replies***************
> Jeff, did you just use a grinder?  Did you get into the cover bolt area, or
> not cut that much?
> 
> Just wondering.
> 
> David (suddenly seems to be the latest fashion) (and it's free :-)
> ----- Original Message -----
> From: Jeff <jayers@win.bright.net>
> 
> > ****************Please Remember to snip your replies***************
> > While working on my control arm placement jig last night I did a little
> > pig shaving on my new front differential.
> 
> *******************************************************************
>      Link to Archive, Mission Statement, Rules, Subscribe and
>            Unsubscribe instructions  are available at:
>              http://www.pclink.com/jnutter/JPOR.htm