Re: JPOR: 3/4T locking hubs

[John Nutter <jnutter@xxxxxxxxxx>]

My '79 J-20 uses standard 1/2 ton style internal locking hubs on the 8
lug Dana 44 as well. I've only seen those external hubs on older 3/4 ton
axles. 

"Paul W." wrote:
> 
> ****************Please Remember to snip your replies***************
> Eight lug Fords come in internal hub, too... my '78 F-250 has a RC D44 w/disc
> brakes and internal hubs.  Pretty sure most external bolt hubs are found on
> older drum brake axles in full-size Fords & GM's...
> 
> Paul
> 
> MadMarx <madmarx@jeep-l.4x4.org> wrote:
> > Dave, either I am confused or you are. The hubs on the 8 lug 44 I have are
> > external like a 6 bolt CJ or Scout hub, but bigger than the CJ hub. They are
> > held on by 8 9/16ths bolts. Not internal like F150 hubs. It also has a
> > different spline count that the internal  on the axle shaft.
> > Mark
> > ----- Original Message -----
> > From: "Dave Jacobs" <DJacobs@Northland-Elec.com>
> > > They're the same size. However, I have two sets of '79 F250 D44 internal
> > > hubs, factory ones.
> 
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
> *******************************************************************
>      Link to Archive, Mission Statement, Rules, Subscribe and
>            Unsubscribe instructions  are available at:
>              http://www.pclink.com/jnutter/JPOR.htm

-- 
John Nutter '85 CJ7
JeepWire.Com Editorial Staff
http://www.outdoorwire.com/4x4/jeep/

Admin for Jeepoffroad Mailing List
http://www.pclink.com/jnutter/jpor.htm

President of Trailriders 4x4 club 
http://www.mntrailriders.org/