Re: JPOR: JPOR: Front D44 progress pics

["MadMarx" <madmarx@xxxxxxxxxxxxxx>]

Dave, either I am confused or you are. The hubs on the 8 lug 44 I have are
external like a 6 bolt CJ or Scout hub, but bigger than the CJ hub. They are
held on by 8 9/16ths bolts. Not internal like F150 hubs. It also has a
different spline count that the internal  on the axle shaft.
Mark
----- Original Message -----
From: "Dave Jacobs" <DJacobs@Northland-Elec.com>
To: <jeepoffroad@4x4wire.com>
Sent: Friday, December 01, 2000 11:35 AM
Subject: RE: JPOR: JPOR: Front D44 progress pics


> ****************Please Remember to snip your replies***************
> They're the same size. However, I have two sets of '79 F250 D44 internal
> hubs, factory ones.
>
> -----Original Message-----
> From: MadMarx [mailto:madmarx@jeep-l.4x4.org]
> Sent: Friday, December 01, 2000 10:37 AM
> To: jeepoffroad@4x4wire.com
> Subject: Re: JPOR: JPOR: Front D44 progress pics
>
> ****************Please Remember to snip your
> replies***************
> Trust me on this. PUT THE DRIVE GEARS IN YOUR TOOLBOX IN
> YOUR JEEP. That way
> as soon as you break a hub, which will happen someday, you
> have a cheap
> really strong way to get back to civilization. I have a
> couple of those in
> my jeep toolbox, and I don't even had internal hubs, I just
> have them for
> others if they need them. I do need to find some for my 8
> lug 44 with
> external hubs...
> Mark
> ----- Original Message -----
> From: "Jeff" <jayers@win.bright.net>
> To: <jeepoffroad@4x4wire.com>
> Sent: Friday, December 01, 2000 11:23 AM
> Subject: Re: JPOR: JPOR: Front D44 progress pics
>
>
> > ****************Please Remember to snip your
> replies***************
> > The D44 is a '75 model that came from a Ford F150 with
> drum brakes.  It
> > had standard lockout hubs.  The other axle is from a '89
> Grand
> > Wagoneer.   It came with solid drive gears instead of
> lockout hubs and a
> > np229 transfer case.  The drive gears can be replaced with
> lockouts as I
> > am planning to do.  Jeff
> >
> > B Nelson wrote:
> > >
> > > ****************Please Remember to snip your
> replies***************
> > > Jeff,
> > > What year is that axle?
> > > Did it come with full time 4x4 or lock-outs?
> > >
> > > Brad Nelson
> > >
> > > Jeff Wrote:
> > > >
> > > > Check out
> > > >
> > >
> http://albums.photopoint.com/j/AlbumIndex?u=166494&a=8669788
> > > > for the latest pics of my D44 shortening project.
> > > > Jeff
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Shopping - Thousands of Stores. Millions of
> Products.
> > > http://shopping.yahoo.com/
> > >
> *******************************************************************
> > >      Link to Archive, Mission Statement, Rules,
> Subscribe and
> > >            Unsubscribe instructions  are available at:
> > >              http://www.pclink.com/jnutter/JPOR.htm
> >
> *******************************************************************
> >      Link to Archive, Mission Statement, Rules, Subscribe
> and
> >            Unsubscribe instructions  are available at:
> >              http://www.pclink.com/jnutter/JPOR.htm
> >
> >
>
>
> *******************************************************************
>      Link to Archive, Mission Statement, Rules, Subscribe
> and
>            Unsubscribe instructions  are available at:
>              http://www.pclink.com/jnutter/JPOR.htm
> *******************************************************************
>      Link to Archive, Mission Statement, Rules, Subscribe and
>            Unsubscribe instructions  are available at:
>              http://www.pclink.com/jnutter/JPOR.htm
>
>