Re: JPOR: FSJ axles

[txh3202@xxxxxxx]

> I saw on jeepwire.com that you put full width FSJ axles on your jeep.
> That is what I want to do, but I am going to use CJ springs and move the spring 
> mounts out. I had a few questions, can you just cut down the tierod to match the 
> steering box to make the steering work?

You might consider going with a FSJ pitman arm.  I haven't tried
it, but at least you won't have to worry about drilling out the
end of your current pitman arm or putting a new end on the FSJ
drag link.  The FSJs (the ones I've dealt with) use 3/4" tie rod
ends and the CJ stuff is much smaller.

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Terry L. Howe        http://www.jeeptech.com/~txh3202
Colorado Springs, CO           mailto:txh3202@att.net
'75 CJ-6, '45 CJ-2A             BH4WDC, CA4WDC, UFWDA
~~~~~  JeepWire Pages http://www.jeepwire.com/  ~~~~~