Re: JPOR: NP435 to AMC engine question
|
|
| http://www.4x4wire.com/lists/jeepoffroad/200007/msg00091.html
|
Short Cuts |
|
|
|
[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: JPOR: NP435 to AMC engine question
Hmmm....still thinking....
>Mo,
>Use a bronco dana 20 transfercase. My buddy did this and he made his own
>adapter. Evidently the 435 has the same spline output as the dana 20 input.
>You
>just need to make an adapter to go between the two. On the plus some bronco
>cases had 2.43:1 gear reduction. Much better than a 205's.
>Mike Knorr
>
>Maurice Cox wrote:
>
> > ****************Please Remember to snip your replies***************
> >
> > >I hear say that the t176 bellhousing will bolt to the Np435 and your
> > >motor, or at least the 6 cyl, then you need a custom pilot bushing. The
> > >expensive part come when you mate the Tranny to the t/c. For a Dana 300
> > >I think the adapter is around 500.00, comes with an output shaft that
> > >you have to change in the transmission.
> >
> > Yeah, but I now need a driver side drop transfer case...like an NP205
>that's
> > already bolted to a Ford NP435...
> >
> > Mo
> > ---------------
> > Maurice Cox
> > Cleveland, Ohio
> > 81 CJ8 360/T19/NP205/D60s -- under construction
> > 92 XJ 4.0/AX15/NP231
> > 79 SJ Just about gone
> >
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
> > *******************************************************************
> > Link to Archive, Mission Statement, Rules, Subscribe and
> > Unsubscribe instructions are available at:
> > http://www.pclink.com/jnutter/JPOR.htm
>
>*******************************************************************
> Link to Archive, Mission Statement, Rules, Subscribe and
> Unsubscribe instructions are available at:
> http://www.pclink.com/jnutter/JPOR.htm
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com