Re: JPOR: NP435 to AMC engine question

["Ed Tapanes" <EdT@xxxxxxxxxxxx>]

The Bronco guys make an NP435/D20 adapter by using the tailhousing from a
Bronco RAT/RAN 3 speed and (I *think*) the tailhousing from a 2WD NP435.
There was a link somewhere on how to do it, but I can't find it now.  Search
around the Bronco sites (www.bronco.com, etc) and you should be able to find
it.

Incidentally, the pre-73, 6 cylinder Broncos had the 2.43 D20s whereas the
other Bronco D20s were 2.34:1.

Later,
Ed T.

> From: "Michael C. Knorr" <michaelknorr@sprintmail.com>
> Subject: Re: JPOR: NP435 to AMC engine question
>
> Mo,
> Use a bronco dana 20 transfercase. My buddy did this and he made his own
> adapter. Evidently the 435 has the same spline output as the dana 20
input. You
> just need to make an adapter to go between the two. On the plus some
bronco
> cases had 2.43:1 gear reduction. Much better than a 205's.
> Mike Knorr
>