RE: JPOR: NP435 to AMC engine question

[James E Howe <James.E.Howe@xxxxxxxxxxxxxxx>]

I hear say that the t176 bellhousing will bolt to the Np435 and your 
motor, or at least the 6 cyl, then you need a custom pilot bushing. The 
expensive part come when you mate the Tranny to the t/c. For a Dana 300 
I think the adapter is around 500.00, comes with an output shaft that 
you have to change in the transmission.
-----Original Message-----
From: maurice.cox [mailto:maurice_cox@hotmail.com]
Sent: Friday, July 14, 2000 11:41 AM
To: jeepoffroad
Subject: JPOR: NP435 to AMC engine question


****************Please Remember to snip your replies***************

I'm sure this is a relatively easy deal, but I'm not sure of the 
details.

What's it take to do a Ford NP435 to an AMC engine?

John, I'm not giving up on you, just looking at options :)  Nice pic in 
the 
mag btw.

Mo
---------------
Maurice Cox
Cleveland, Ohio
81 CJ8  360/T19/NP205/D60s -- under construction
92 XJ   4.0/AX15/NP231
79 SJ   Just about gone

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

*******************************************************************
     Link to Archive, Mission Statement, Rules, Subscribe and
           Unsubscribe instructions  are available at:
             http://www.pclink.com/jnutter/JPOR.htm