Re: JPOR: CJ D30 hubs onto XJ D30?

[Ben Bargabus <ben_b@xxxxxxxxxxxxx>]

If you're up for a little work you could do what I did.  When I made the
Dana 60's for my TJ I cut up an old 30 housing and ground the old
brackets to work on my new 60 housing then welded them in place.  It's a
LOT of work but damn near free.  You could save yourself a lot of
grinding if you just fabbed the brackets from scratch, the control arm
mounts are very easy (bottoms are just two plates with some gussetting,
tops are just thick steel with holes popped for bushings), spring pads
don't require too much more, some plate and some tubing would do it. 
Anyway, if you're confident in your fabricating skills (or those of your
friends) you could make that work.
Later,
Ben.