Re: JPOR: Forced to modify ;)

["MadMarx" <madmarx@xxxxxxxxxxxxxx>]

Paul, I am talking about the number of bolts that hold the spindle onto the
knuckle. I will try to take a digital pic this weekend and get the BOM
numbers off the axle. I don't know what year it is off, but it has dodge
brakes on it and external hubs.

Mark
----- Original Message -----
From: "Paul W." <a4xnut@yahoo.com>
To: <jeepoffroad@4x4wire.com>
Sent: Friday, April 07, 2000 1:55 AM
Subject: Re: JPOR: Forced to modify ;)


> ****************Please Remember to snip your replies***************
> Are you talking about lugs as in how many hold the wheel on?  If so, most
> 3/4T's from any truck maker fit this discription (until the 88 GM IFS
trucks
> and 7 lug Fords).  The bolt count I was referring to was how many bolts
hold
> the spindle onto the knuckle.  If that's what you're talking about, too
what
> year was this Dodge axle off of?
>
> Paul
>
> MadMarx <madmarx@jeep-l.4x4.org> wrote:
> > Paul, just another datapoint to add, I have a dodge 8 lug 44 that has
the 8
> > bolt spindles. I am going to use the knuckles out and r/p and put them
on a
> > wagoneer 44 I have to match the 1 ton floater I am putting in the rear
of my
> > cj.
> >
> > Mark
> > ----- Original Message -----
> > From: Paul W. <a4xnut@yahoo.com>
> > > Scout D30 spindles are 6 bolt and the same part as a drum brake CJ D30
> > > spindle.  Only the Scout (and IH truck) D44 uses the 8 bolt spindles.
> > >
> > > Paul
> > >
> > > B Nelson <cjtrailrider@yahoo.com> wrote:
> > > > Paul,
> > > >       To fit the Scout D30 Spindels on the GM D44
> > > > knuckls you'll have to have the spindels drilled for
> > > > the the 6 bolt pattern.  Why go to all this trouble?
> > > > Why not just source some CJ D30 spindels?
>
>
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
> *******************************************************************
>      Link to Archive, Mission Statement, Rules, Subscribe and
>            Unsubscribe instructions  are available at:
>              http://www.pclink.com/jnutter/JPOR.htm
>
>