Re: JPOR: getting the spindle out and progress report on Grand Wagoneer swap

["Chad Lloyd" <clloyd@xxxxxxxxx>]

Thanks - a chisel.... hmmmm. hadn't thought of that. Gotta go to Canadian
Tire now.


- -----Original Message-----
From: Dave Jacobs <DJacobs@Northland-Elec.com>
To: 'jeepoffroad@4x4wire.com' <jeepoffroad@4x4wire.com>
Date: Thursday, February 24, 2000 2:19 PM
Subject: RE: JPOR: getting the spindle out and progress report on Grand
Wagoneer swap


>****************Please Remember to snip your replies***************
>I incorporated a hefty chisel/hammer action on my Wagoneer spindle when
>first purchased. If that much rust, take a look at the back side of the
>spindle for rust once you have it off. The small spindle bearing back there
>most likely needs replacing too. Dave.
>
> -----Original Message-----
> From: Chad Lloyd [mailto:clloyd@tsi.bc.ca]
> Sent: Thursday, February 24, 2000 11:44 AM
>
>*******************************************************************
>     Link to Archive, Mission Statement, Rules, Subscribe and
>           Unsubscribe instructions  are available at:
>             http://www.pclink.com/jnutter/JPOR.htm
>