got an '86 that needed slave cylinder, but replaced it and realized there was no pressure forward against it from teh clutch fork. Thought maybe it was possible for pressure plate to be screwed up, so i replaced that and teh clutch while i was in there since it was worn as well. Got the tranny and everything back up on it but still no pressure against the slave cylinder from the clutch fork so i pretty much have no clutch pressure. What else could it be in there?
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.