I'm in the process of lifting my 84'toy. It already has a 3'' body lift. I'm making my own suspension lift. I got Pro comp es3000 shocks . I arched the front springs my self . I went a little over board too i think. They are measuring up at a 6 inch lift now. But when i put the springs in they should go down an inch or two?. I'm also putting in 4'' blocks in the rear. I know i know, Dont kill me bout that i'm running out of money and thats the only way i'm going with that. So it should work out to 4inches in the rear and 5inches in the front. My questions are : what am i going to do with my draglink? whats the cheapest way to fix this problem?. Next am i going to have to extend my brake lines?. I'm going to build my own spacers for the driveshaft that should work out fine right?. Any other probs i might run into? Any help would be great. I'm on a tight budget too so keep that in mind. thanks
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.