So I bought a basic LED A/F meter, and hooked it up today. At idle cold it reads nothing. As it warms up a little it starts to rise up to show it leaning to the rich side of the gauge. Once it't warm even at idle, it cycles back and forth about 1 time a second which i understand to be normal only at about 1500 RPM. This is the first time i ever tried to use one of these things. Is this normal at Warm Idle?
I have a bit of a hesitation on acceleration between about 1000 and 2000 RPM. Timing, and idle are set to spec and it runs fantastic cold. Idle is smooth and I don't detect any kind of miss. Exhaust sounds pretty rattly when accelerating. 94 3.0 3vze 5-SPd
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.