I've had a wierd metallic rattle from under my 95 LS right at 2,000 rpm,....for quite a while. I had a friend hold the rpms at 2000 while I was under the truck. The rattling sound is coming from this small metal cylinder on a bracket, that hangs under the front driveshaft U - Joint. I'm guessing that it is supposed to reduce vibrations from the front u joint.
Has anyone had this problem,.....any suggestions on how to stop the rattle? Thinking maybe I can just take it off. Any thoughts?
-------------------- 95 3.0 LS (24v)
241,000 miles and still going
Edited by 95LS (06/06/12 11:50 PM)
95 LS 3.0: what's the cylindrical weight hanging under the front U-Joint ? Can I remove
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.