For your purposes, the auto hubs, which are much, much, more common, will do just fine, and you don't get your feet muddy. Don't know if you can go from 2hi to 4hi and have the cad work and then the hubs lock up at 62mph (the 2hi to 4hi shift speed limit) without grenading the hubs, but they are fairly tough. They are a biotch to remove from a donor - the bolts round out. I use an allen socket and a breaker bar, and put it under unscrew tension short of round off, and whang the swivel of the breaker bar with a bfh to shock the fastener loose.
-------------------- Not responsible for advice not taken...
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.