Final Edit: Cant wait any longer,....took my best guess hoses are on, plenum now going on. Thanks anyway.
EDIT: Monday morning 10:30 CST. I'm sitting here this morning having taken the day off to finish my engine but cant move forward, I have to get these two heater hoses on before I can install my intake plenum.......Can someone open their hood, look at these hoses and tell me how they are routed?? Not in shop manual!!
Original Post: On my 95 LS 3.0: I didnt take a picture of my heater hoses and how they were routed from the firewall inlet and outlet to the cylinder head crossover pipe.
Looked in my shop manual....no help. Can anyone tell me how the two heater hoses are routed from the fire wall pipes to the crossover pipe?
Looks like possibly the hose that has the pronounced L shape goes to from the left side fitting on the crossover then up to the right side firewall heater pipe, and that the other hose goes from the right side fitting on the crossover pipe to the left heater core inlet/outlet,....but the shape of that hose doesnt quite look right to do that.
-------------------- 95 3.0 LS (24v)
241,000 miles and still going
Edited by 95LS (09/12/11 05:25 PM)
--NEED HELP THIS MORNING!-- Now,....nevermind--hoses are on
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.