Mount to tank is different. 4cyl mounts to front top corner of tank, to a surface approx. 45* to the vertical, and is removable from underneath. 6cyl mounts to top of tank. Geometry of the sender swing arm will be different. Some modifications must be made to pickup tube to extend it past pump location. May be doable, and if cheap, maybe worth trying as long as you can't find the right one.
Might be easier to repair yours...
-------------------- Not responsible for advice not taken...
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.