tried to order new switch today - its a 6 wire as opposed to the non-exceed 5 wire switches. was able to start my paj with the 1987 raider 5 wire ignition switch, but no heater, and sounded like the glow relay was a little too active for a mild day... anyway, took it out once i confirmed the paj 6 wire switch was bad. called rightdrive in vaughn [near toronto] regarding an ignition switch, as well as a primer pump for my wife's delica, [hard starts lately, despite rigging up a 2nd battery...]. no response yet - so i emailed matt at milner in UK. any other ideas? checking our garage sale board, but any advice is appreciated - i am located in sudbury, ontario.
***does anyone have a spare ignition with 6 wires coming off the back of the white cylindrical part? if yes, pm me a pic if you can. I'll try to put up a link to a pic of what mine looks like later tonight if i can.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.