Talk about late to the party... dang looks like this tread was from 2 years ago, but thats not going to stop me from trying. Well guess what i also have a 91 LS Trooper with the stock 2.8 in her, and well to say it's tired would be a understatment. When i first bought her i took her valve covers off to check the motor and what did i find but a 1" thick layer of black fur all over the motor. So needless to say a rebuild was on my list. Apon doing ALOT of research on it, i found the 3.4 upgrade you all have been talking about in this forum and i must say that i am more than interested.
So here's the questions: #1 i don't want to wait till i can afford to buy a new motor so does anyone know where to get a good used? #2 I am planning on buying new fuel injectors (ok reman'd) and the TBI spacer, will these fit to the next motor if i go that route? #3 I have com acrost this web dealer http://www.engine-parts.com/GMV6/gm2834stkr.html claiming to just kit the present engine up to the 3.4 lvl with a new block. Is this visable for what i would want? #4 Also i am planning on lifting the truck up 3 inch with a suspention redo with this kit http://www.pureisuzu.com/3_87-91_trooper.htm Has anyone got tips or info? Is this a good kit to get?
Well 4 is a good start here's hoping this aint a dead thread!!!
-------------------- No matter where you go, there you are.
91 Trooper LS AT
2.8 stock(soon to change)
Suspention stock(soon to change)
31x10.5 R15 BFG A/T KO's
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.