I figured I would start this thread to show the pics. I finally got everything tacked up. (sorry for the long wait everyone) This will give you a rough idea of what its going to look like. It is not finish welded yet or 100% complete., but I did a quick spray job with paint so it looks better than raw steel. The final one on mine will be sprayed with the bed-liner to match the rest of my Monty. I often get sick of trying to find footing to step up and put my bikes and other stuff on the roof so there is a footstep on the side that will make it much easier to get access to the roof. We were able to greatly increase the rear departure angle and I will be putting a skid plate under the rear storage area to stop it from getting bashed in. Anyhow, opinions are welcome.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.