The 22R in my 1984 PickUp has amost 300K miles and is getting tired. It is starting to use about 2.5 quarts over a 5000 mile period. So I am considering a engine rebuild or 22RE engine replacement with or without the fuel injection. I'm not looking for a big project here, I don't have a donor vehicle and it has been awhile getting famailar with the differances in the engines.
I would like to with a few basic questions hopefully the forum can answer:
1. Is there a write up on performing a 22RE install with cross-over to fuel injection to a previously non fuel injected truck ? 2. What all will I need from the Fuel injected vehicle to perform the cross-over ? 3. Does the intake manifold (carburated) or exhaust manifold swap over to the 22RE ?, as I remember one does the other does not.
1984 EXT CAB PUP, Weber 32/36, LC Headers, DOA C270, Detroit (Rear), All-Pro Front.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.