NOTICE: 4x4Wire is experiencing technical difficulties with the ability add new posts. We are working to resolve the issue. You can reply to existing posts. Please direct any question to me at [email protected]
Thanks dude, I had to figure it out the hard way. There are three wires on the front, each is red with blue striping but two are connected and the third is seperated. Do I attach the double to the 80 amp and the single to the 30 amp? Just want to make sure as I didn't take a piture of it before I removed it. Thanks again
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.