Start with the KIKI and check output power on glowup. If OK isolate each glow plug and check resistance. Also since it's unlikely that you'll have an ammeter capable of 20 amps, you can just touch the + probe of your voltmeter to the tip of one of the glow plugs...........the - probe to ground...........and you should see approx. 12V during the 30 seconds immediately following the turning of the key to the #2 position
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.