Right I just registered, you have to tell me to search first and go use google, a second-rate search engine at best.
If anyone has a helpful reply I'd appreciate it. No searches anywhere here or any search engine have produced any schematics of a bypass or DIY clone of the QoS module, a few here and there talk of writing one up one day. I know I can just hook up a switch and reduce the glow plug voltage from 12v down to 6v with a rheostat but I was hoping find a few time-tested methods of rewiring it to still incorporate the sensors.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.