I have the best luck whamming the bearing cups with a socket and a BGH, yoke on a wooden block. Seems to break them loose better, and I've never bent a yoke that way, and I have bent them in a vise. I spade drill a 1" hole in the block so the opp. side cup has somewhere to be driven to.
-------------------- Not responsible for advice not taken...
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.