virtually no difference on my approach angle from where i have it now. It doesn't hang as low by about 2". It sticks out about 2" farther though. Its 12" off the frame, and hangs down about 2.5 inches from the bottom of the frame at its mounting point(its the part on an angle for backward facing lights.) Roughly have a 55* approach angle, and the bumper is on a 60*angle on the bottom part, the initial angle is the worst case scenario. As soon as i get 35's it should be about the same (both 60*), and as i do more mods like suspension it will only get better as well. It shouldn't drag, but if it does chicks dig body damage.....right???
-------------------- 84x4 Toyota Ext. Cab Deluxe
Not enough hours in the day to do what i want.....
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.