I just Herculined my interior, and took out my ECU to do so. Since then the truck is hard to start. If I jiggle the ECU Wires, it will start after a bit.
Last night I figured out that the pins in the harness were loose on making contact with the ECU Pins. It seemed to be a number of pins loose. I tried crimping them together more and adding some di-electric grease, still same problem.
What are my options? Soldering on three new plugs from a donor?
-------------------- '90 Trooper - 2.6L 5-Speed - 1" BL - Custom Roof Rack+2x55watt ProComp - Herculined Interior - Pace Setter Header - Dynomax Super Turbo - K&N - ProComp ES3000 Shocks - Optima Red - MSD 6A - 31" Kumho Mudders - Black Rock Crawlers
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.