basically, the short answer is, only the ARB exists... or your welder. Powertrax has never made a locker for the 12-bolt, though there has been some talk about bringing this into reality (see the sticky thread atop this section).
also, remember, there are two distinctly different versions of the 12-bolt. the earlier one and the later one (98+)... but the same above applies to both variations.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.