FrankR
Web Wheeler
Reged: 02/01/04
Posts: 10225
Loc: Columbia, SC
|
Re: Aisin 372-L Swap
11/02/05 04:39 AM
|
|
|
Mark -
Thanks for the offer. Right now I don't know enough to know what I need, but from the FSM description it looks like any of the following special tools would be very helpful:
MD998335 - Oil pump band (looks like a large piston ring compressor)
MD998412 - Guide (rod with one end threaded)
MD998211 - Retainer (very large round flat plate with a threaded center hole)
MD998353 - Torque driver set (appears to be a nutdriver with selectable torque values)
MB998903 - Spring compressor (a large "U" shape with threaded hole - this is half of the part I'm now trying to fabricate)
MD998904 - Bolt (threaded rod with a "T" handle - the second half of the above part - threads into the bottom of the "U")
If you have any of those, I'd be very interested. If you want a picture reference, they're in the FSM, A/T section.
Thanks again.
Frank
-------------------- '89 G-Raider Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 155k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, 165A alt., Lifeline AGM, Rust-Oleum
Edited by FrankR (11/02/05 04:59 AM)
|
|