I see a couple of small welds that would make me wonder; rest should pop out of the way. One thing I'd suggest is that you take some cardboard, your camera, measuring tape, and sharpie with you to get the pedals; trace the holes from the donor firewall for a template; the picture will give you a point of reference. Also look for a tab on the bottom frame of your dash; it's where your clutch return spring will be anchored; you might have to rig a little something up there. Best view is with the underside trim out of the way.
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.