1. My hazard flasher just died ( 1991 SWB) from an inadvertent short while fixing up trailer wiring :blush: . Fuse is OK so suspect hazard flasher switch( unit? module?) needs replacing. Looking/feeling right above interior fuse block there seem to be 2 relay-type inserts that can be wiggled but won't come out possibly becasue of a plastic retaining clip ( Can't see that well) Any advice on how to replace hazard flasher modules/units and are they readily available?
2. Just started towing 1600 kg RV and while performance is great, fuel endurance is down to 300 km/tank( 50 liter capacity or so). Can a larger fuel tank be installed with minor hassle? (say from the longer wheelbase Pajero, or are there aftermarket units?)
This site and all original materials contained herein are Copyright 1999 - 2013 by OutdoorWire, Inc. -- All Rights Reserved.
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
This publication and OutdoorWire, Inc. assume no liability for your use of the material contained within this site.
OutdoorWire, 4x4Wire, SUVWire, JeepWire, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc.